PELATIHAN PROCESS CONTROL & SYSTEM ENGINEERING

PELATIHAN PROCESS CONTROL & SYSTEM ENGINEERING

Training Process Control & System Engineering

Description Training Process Control & System Engineering

Operation of the plant is expected to run well in accordance with the desired conditions. In addition, the mill must meet the safety requirements of the process, meet the specifications of the product, dispose of waste according environmental regulations, and considering the economic aspects.
Their operating requirements demanded continuous monitoring and control of the process right so that a plant can work optimally and influence the outcome or production disruption can be minimized.

Training Material Process Control & System Engineering

1. Basic Concepts Control (Basic Process Control)
2. Feedback Control (Feed Back Control)
3. Sensors and Measurement (Sensors and Measurement Apparatus)
4. Valve Controller (Control Valve)
5. Dynamic behavior (Dynamic Behavior)
6. stability & Tuning (stability & Fine Tuning)
7. Control Cascade & Feed forward (Cascade & Feed forward Control)
8. Basic Pneumatic Control (Principle of Pneumatic Control)
9. Level Control (Level Control)
10. pressure Control (pressure Regulation & Control)
11. temperature Control (temperature Control)
12. Control of the flow rate (flow Measurement and Control)
13. Control System Design (Design of Process Control)

participant

Participants can be followed by all those interested in this field. It can also be followed by all who want to move on and learn more on this field.

instructor

Instructor in Training and Training will be hosted by an expert in this field.

Method

1. Presentation

2. Discussion among participants

3. Case studies

4. Simulation

5. Evaluation

6. Consultation with instructor

Jadwal Pelatihan Lokal Media Training 2024 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024 || Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

Batch 3 : 05 – 06 Maret 2024 | 19 – 20 Maret 2024 || Batch 4 : 03 – 04 April 2024 | 23 – 24 April 2024

Batch 5 : 07 – 08 Mei 2024 | 21 – 22 Mei 2024 || Batch 6 : 05 – 06 Juni 2024 | 25 – 26 Juni 2024

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024 || Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024 || Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024 || Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

Jadwal Pelatihan Lokal Media

TEMPAT PELAKSANAAN PELATIHAN

• REGULER TRAINING
  • YOGYAKARTA
  • JAKARTA
  • BANDUNG
  • MALANG
  • SURABAYA
  • BALI
  • LOMBOK – NTB
• IN HOUSE TRAINING
• ONLINE TRAINING VIA ZOOM

Note :

Waktu dan tempat pelaksanaan pelatihan bisa kami sesuaikan dengan kebutuhan peserta.

Investasi Pelatihan Lokal Media Training:

1. Investasipelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta
2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Lokal Media Training:

1. Hotel
2. Tempat Pelatihan
3. Module / Handout
4. FREE Flashdisk
5. Sertifikat
6. FREE Bag or bagpackers (Tas Training)
7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
8. 2xCoffe Break & 1 Lunch, Dinner
9. FREE Souvenir Exclusive
10. Training room full AC and Multimedia