TRAINING SYSTEM SAFETY ENGINEERING AND MANAGEMENT

TRAINING SYSTEM SAFETY ENGINEERING AND MANAGEMENT

TRAINING MANAJEMEN SISTEM KEAMANAN

TRAINING SYSTEM SAFETY

TRAINING PURPOSE:

1. The system safety engineering and management  is intended to describe “how” to set up and implement the safety risk management process.
2. The system safety engineering and management  establishes a set of consistent and standardized procedures and analytical tools.
3. The system safety engineering and management  is intended for use in support of specific system safety program plans.
4. The system safety engineering and management  provides guidance on “how” to perform safety risk management, other questions concerning “when, who, and why” should be addressed through the three types of plans discussed in this document: System Safety Management Plan (SSMP), and a System Safety Program Plan (SSPP), and an Integrated System Safety Program Plan (ISSPP).
5. The system safety engineering and management  focuses on “how”  to perform safety risk management, while these planning documents describe, the organization’s processes and procedures for implementing system safety.

TRAINING MATERIAL OUTLINE:

1. Principles of System Safety
•    Planning principles
•    Hazard analysis
•    Comparative safety
•    Risk management decision making
•    Safety order of precedence
•    Behavioral-based safety
•    Models used by system safety for analysis
2. Safety Assessments Before Investment Decision
•    Safety assessments before investment decision
•    Operational safety
•    Comparative safety assessment (CSA)
3. Post-Investment Decision Safety Activities
•    Post-investment decision safety activities
•    Objectives and requirements
•    Preparing a system safety program plan
•    System safety program plan contents
•    Integrated system safety program plan
•    Program balance & interfaces
4. System Safety Guidelines for Contracting
•    contracting principles
•    contracting
•    evaluating bidding contractors (system safety checklist)
•    managing contractor system safety (contract oversight)
5. Integrated System Hazard Analysis
•    Integrated approach
•    Risk control
•    Use of historical data
6. Safety Analysis – Hazard Analysis Tasks
•    The design process
•    Analysis
•    Qualitative and quantitative analysis
•    Design and pre-design safety
•    How to review and/or specify a safety analysis
•    Evaluating a preliminary hazard analysis
7. Analysis Techniques
•    Analysis techniques
•    Introduction
•    Fault hazard analysis
•    Fault tree analysis
•    Common cause failure analysis
8. Test and Evaluation Safety
•    Tests conducted specifically for safety
•    Tests conducted for purposes other than safety
•    Test safety analysis
•    Other test and evaluation safety considerations
9. Facilities System Safety
•    New facility system safety
•    Existing facilities
•    Facility system safety program
•    Analytical techniques
•    Facility risk analysis methodology
10. Operational Risk Management (ORM)
•    Defining risk and risk management
•    ORM principles
•    The ORM process summary
•    Implementing the ORM process
11. Human Factors Engineering and Safety Principles & Practice
•    Human factors process overview
•    Managing the human factors program
•    Establish human factors requirements
•    Conduct human factors integration
•    Human factors in system-to-system interfaces
•    Human factors engineering and safety guidelines
12. Successful health and safety Management
13. Managing health and safety
14. Safety guidance -Notification and marking of sites

TRAINING INSTRUCTOR

Caecilia Sri Wahyuning S.  Lulusan dari Institut Teknologi Bandung, dan Beliau sekarang sebagai dosen di Teknik Industri Institut Teknologi Nasional Bandung. Selain mengajar sebagai dosen, di Kampusnya Beliau juga pernah menjadi kepala laboratorium perancangan system kerja dan ergonomic dan juga menjadi PIC unit penjaminan mutu institute teknologi nasional dan kepala bagian monitoring dan evaluasi bidang non akademin UPM institute teknologi nasional. Beliau juga memiliki pengalaman riil pengerjaan projek diantaranya Pembuatan Standar Kompetensi bidang Pengelasan, Jasa Konsultansi Sumber Daya Manusia Penyediaan Konsultansi Key Performance Indicator Dalam Rangka Reformasi Birokrasi Departemen Keuangan, Jasa Konsultasi Perizinan & Studi Kelayakan Pendirian SPBU & SPPBE. Beliau terlibat secara aktif di beberapa organisasi di kampus maupun di lingkungan social. Ibu Caecilia Sri Wahyuning S.  Secara aktif melakukan penelitian dan melakukan publikasi karya ilmiah Beliau di dalam dan luar negeri. Ibu
Caecilia sudah sering memberikan pelatihan/training kepada perusahaan di Indonesia untuk judul-judul di bidang kompetensi Beliau.